Roduct Categories
- 3m full anechoic chambers
- 3m semi anechoic chambers
- 5m semi anechoic chambers
- 10m semi anechoic chambers
- CISPR-25 semi anechoic chambers
- MIL-STD-461
- Compact full anechoic chambers
- Reverberation chamber LUF 80MHz
- Reverberation chamber LUF 100MHz
- Reverberation chamber LUF 200MHz
- Reverberation chamber LUF 400MHz
- Reverberation chamber LUF 1000MHz
-
Anechoic chambers
In the early days, the electromagnetic interference test was conducted in an ideal test site—Open Area Test Site (OATS). An OATS is an area characterized by cleared level terrain and the presence of ground plane. To meet the validation requirements, a metallic ground plane is recommended. Such a te...
-
Microwave chambers
Microwave chambers are full anechoic chamber for testing at microwave frequencies. Typical equipment under test is mobile and telecommunications products as well as electronic products using wireless communication technology. Larger microwave chambers (antenna test ranges) are built to test radar, s...
-
Reverberation chambers
A reverberation chamber is a specialized EMC test chamber generating very high field strength using modest amplifier power. The reflections between the RF shielded walls are optimized to add up to maximum of as many standing waves as practically possible. The chamber is mainly used for testing elect...
-
Shielded rooms and boxes
Due to increased environmental electromagnetic pollution, sensitive and accurate measurements are often affected by RF noise. The application of RFT RF shielded rooms provides the higher possible shielding attenuation, creating a controlled electromagnetic environment to perform high sensitive testi...
Copyright © RuiFeng RF Technology (Shanghai) Co.,Ltd 沪ICP备2021035661号-1