The MT microwave absorber range consist of high performance, broad band, carbon loaded polystyrene absorbers with an operating frequency from 70MHz to 40GHz. Due to the excellent performance at microwave frequencies the MT series is designed for Antenna Pattern Measurement (APM), (compact) Antenna Test Range (ATR) Radar Cross Section (RCS), and free space testing anechoic chamber applications.
The MT microwave absorber range consist of high
performance, broad band, carbon loaded polystyrene absorbers with an operating frequency
from 70MHz to 40GHz. Due to the excellent performance at microwave frequencies
the MT series is designed for Antenna Pattern Measurement (APM), (compact)
Antenna Test Range (ATR) Radar Cross Section (RCS), and free space testing
anechoic chamber applications.
The MT series consist of four different models:
MT25 (250mm / 10”)
Material |
Closed-cell polystyrene |
Dimensions |
1200mm* 600mm* 450mm(L*W*H) |
Weight |
7.36Kg / m² |
Color |
Dark Grey |
Humidity resistance |
No deterioration from moisture |
Product life time |
> 40 years |
Power Handling |
1500 W / m2 |
Frequency range |
20MHz - 110GHz |
Fire retardancy |
ISO 11925-2 CLASS E / DIN 4102CLASS B2 |
Clean room class |
ISO14644-1 4级/US Fed. Standard 209E CLASS10 |
Max operating temp |
70°C |
Reach compliant |
Yes |
ROHS compliant |
Yes |
Walkway absorber solutions
The walkway solution is designed to provide safe and easy
access for the test engineers to the antenna and EUT in full anechoic chambers.
Due to the use of connectable fiberglass reinforced epoxy grid panels, they
combine extreme strength with minimal RF scattering. This walkway is available
as a cascade with floor absorber (WWA) and without (WW).
It is recommended to use the walkway in the
non-critical area of the chamber and at a reduced height compared to the
applied floor absorber. For example if the floor absorber is MT-45, the
WWA-MT25 shall be used. The reflectivity of this walkway solution corresponds
to that of the performance of the absorber under the walkway for frequencies up
to 3GHz. Above 3 GHz the reflectivity (backscatter) performance is limited to
-40dB. Despite the specular reflection (scatter) is in the order of -20dB, the
angle of incidence equals the angle of reflection and therefore the unwanted
waves will damped by the absorber lining of the chamber. Due to the reduced
height of the walkway and the above mentioned RF characteristics, the influence
of the walkway on the measurements in the chamber is neglect able as long as
the walkway is used in the non-criical area of the chamber.
The walkway solution model WWA is available in the
following models:
Walkway
solution using HT25 absorber (hybrid)
Walkway
solution using MT25 absorber (microwave)
Walkway
solution using HT45 absorber (hybrid)
Walkway
solution using MT45-JT absorber (microwave)
Specifications of the walkway absorber solutions:
Material |
Reinforced glass fibre epoxy grid |
Dimensions grid |
1186mm*577mm*25mm |
Product life |
>25 years |
Color |
RAL 7035 /grey |
Height of WWA-HT25/MT25 |
295mm (tot. height) |
Height of WWA-HT45/MT45-JT |
495mm (tot. height) |
Recommended maximum distributed load |
6kN |
Breaking load |
27kN |
Copyright © RuiFeng RF Technology (Shanghai) Co.,Ltd 沪ICP备2021035661号-1