A reverberation chamber is a specialized EMC test chamber generating very high field strength using modest amplifier power. The reverberation room is mainly used for testing electrical immunity of test objects. The shielding is established by constructing the test chamber from a 2 mm pan-type galvanized or aluminum panel system. The COMTEST reverberation chamber, which is exclusively represented by RFT, creates a multi functional EMC test facility for commercial, military and automotive testing.
The reverberation chamber model 1716-0400 has a Lowest Usable Frequency (LUF) of 400MHz. The usable test volume depends on the size of the equipment under test (EUT) and will be determined upon customer request.
A reverberation chamber is a specialized EMC test chamber generating very high field strength using modest amplifier power. The reverberation room is mainly used for testing electrical immunity of test objects. The shielding is established by constructing the test chamber from a 2 mm pan-type galvanized or aluminum panel system. The COMTEST reverberation chamber, which is exclusively represented by RFT, creates a multi functional EMC test facility for commercial, military and automotive testing.
The reverberation chamber model 1716-0400 has a Lowest Usable Frequency (LUF) of 400MHz. The usable test volume depends on the size of the equipment under test (EUT) and will be determined upon customer request.
Typical features of the reverberation chamber model 1716-0400:
Lowest usable frequency 400MHz
Typical usable test volume 0.80 x 0.80 x 0.80 m (l*w*h)
Shielding effectiveness according to EN 50147-1 (>80dB at 10kHz)
Full compliance immunity test site for frequency range of 400MHz to 18GHz as per IEC 61000-4-21
Typical specifications of the reverberation chamber model 1716-0400:
Dimensions |
2.55 x 1.95 x 1.875 m (L*W*H) |
Usable test volume |
0.80 x 0.80 x 0.80 m(L*W*H) |
Construction |
2mm ZMA-140 shielding panels with a free standing structural steel support |
Ventilation |
300mm*300mm / 18GHz |
EUT door |
RF shielded swing door model 600mm*900mm |
Wall entry panel |
300x300mm including RF connectors |
EUT power line |
Filtered 230VAC / 32A / single phase |
Lighting |
CDMT lights 100W |
Frequency range |
From 400MHz up to 18GHz. |
Stirrer system |
Z-fold duo-pole rotating vertical stirrer system |
Options for the reverberation chamber model 1716-0400
Small non-conductive test table.
EUT grounding strip
Various RF connectors and FO feed through and wave guides
Pair of antenna’s
Non-conductive bracket with adapter for antenna’s
Copyright © RuiFeng RF Technology (Shanghai) Co.,Ltd 沪ICP备2021035661号-1